Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
I have a question I haven't seen posted yet. Is it easy to align the die with an image that is already stamped (or printed on paper), like using a punch? or does the die slip easily and it may not turn out where I want it?
I would be getting a Cuttlebug to use with the dies if that makes a difference. I'm a bit of a perfectionist when it comes to these things.
I use a Cuttlebug and I prefer to run the die through first and then stamp on it. The other way can be done with only slightly more effort to make sure you don't move the die/paper when adding the top plate of the sandwich, but I tend to also be a bit of a perfectionist about having the image centered, so I like to cut first (especially if I'm trying to eek out a cut on a scrap).
I have seen AmyR blog about using a small piece of tape to hold the die in place. I have yet to try this as I just got my Nestabilities but I thought it was a cool trick she shared.
Yep, I use a small piece of tape, too. Just put the tape on the die and then onto what will be the scrap when you cut out your image (not on the image). Works great to hold the die in place and peels right off the metal.
My downline (cmustopa) came up with these sandwiches which I find work MUCH better than the other ones posted AND you can see the image you're cutting out.
CUTTING (from the bottom up):
A Plate
B Cutting Plate
Paper/Cardstock (stamped) face UP
Cutting Die, face DOWN
C Plate
The advantages of this are that a) you can see exactly where you are cutting around your image, and b) the C plate is sturdier than the B plate and can withstand more direct pressure from the Cuttlebug as it goes through. I have also found less embedding of the die in the plate this way, even though the conventional instructions for die cutting with the Cuttlebug say to do it face up.
EMBOSSING (from the bottom up):
A Plate
B Plate (can be the same one you cut with)
Die with cut piece still inside (flipped over so you can’t see the image)
Tan rubber mat
2 layers of HEAVY cardstock (I use a folded A-2 card made with 130# cover stock)
B Plate
Other instructions tell you to put the cardstock shim directly on top of the die, and then the rubber mat. I find I get a better impression this way. You may want to experiment with the cardstock shim layers, using 3 layers of 90# cardstock if you don’t have 130#. However, I have not cracked one B plate since I started doing it this way.
Another advantage of doing it this way is that when you’re switching back and forth between cutting and embossing, you only have to change the top plate.
thanks so much for the great ideas, everyone! I like to print a lot of digital images, so it's hard to cut first, image last. I'm also not wanting to spend a lot of money on punches, so I think this is the best solution for me.
I'm glad this question was posted and you all provided great answers. I've only had my nesties one week and wondered the same thing. I'll give each of the suggestions a try!
__________________ I'm a ChemoAngel & SeniorAngel! Click HERE to learn more.
My downline (cmustopa) came up with these sandwiches which I find work MUCH better than the other ones posted AND you can see the image you're cutting out.
CUTTING (from the bottom up):
A Plate
B Cutting Plate
Paper/Cardstock (stamped) face UP
Cutting Die, face DOWN
C Plate
The advantages of this are that a) you can see exactly where you are cutting around your image, and b) the C plate is sturdier than the B plate and can withstand more direct pressure from the Cuttlebug as it goes through. I have also found less embedding of the die in the plate this way, even though the conventional instructions for die cutting with the Cuttlebug say to do it face up.
EMBOSSING (from the bottom up):
A Plate
B Plate (can be the same one you cut with)
Die with cut piece still inside (flipped over so you can�t see the image)
Tan rubber mat
2 layers of HEAVY cardstock (I use a folded A-2 card made with 130# cover stock)
B Plate
Other instructions tell you to put the cardstock shim directly on top of the die, and then the rubber mat. I find I get a better impression this way. You may want to experiment with the cardstock shim layers, using 3 layers of 90# cardstock if you don�t have 130#. However, I have not cracked one B plate since I started doing it this way.
Another advantage of doing it this way is that when you�re switching back and forth between cutting and embossing, you only have to change the top plate.
No problem! I print digital sentiments all the time and position with my tag dies and a piece of tape!
I would suggest that you use removable tape or if you are using regular scotch tape...stick it to your shirt or pants a couple of times before putting it on the paper, the fibers you pick up from your clothes will make it not as sticky and give you less risk of tearing paper when you remove it.
What are Nestabilities and where do you purchase them?
I keep seeing conversations about nestabilities and stampers that have used them in making their cards and I don't know what they are. HELP!
Thanks for enlightening me!
Hold on to your wallet - what you hear and see will make you want them. I sure do. They are dies you can use with your die-cutting machine (like Cuttlebug) to cut shapes - e.g., circles, squares - in sizes that nest. There are plain edged ones and scalloped edged ones. You'll see tons of cards in the gallery that use them. I'll try to find a couple and add the links to this thread.
__________________ Mary Ann GALLERY Fan Club member since 4/08
Hold on to your wallet - what you hear and see will make you want them. I sure do. They are dies you can use with your die-cutting machine (like Cuttlebug) to cut shapes - e.g., circles, squares - in sizes that nest. There are plain edged ones and scalloped edged ones. You'll see tons of cards in the gallery that use them. I'll try to find a couple and add the links to this thread.
I second the tape suggestion! I have tried cutting then stamping, but I am usually off centre when I do that. SO I stamp then line the nestie up and use removable tape (made by scotch tape- blue package I think) and this works like a dream! I hardly use up my tape since I just re use the piece over and over (stick it on the edge of the table). I also had one time wher the tape left a bit of a residue on my image (probably re used once too many times!). THe adhesive eraser from SU took it right off!
Oh and from one Diane to another.... you will LOVE these nesties! Can't wait to get another shape set!
Diane
I keep seeing conversations about nestabilities and stampers that have used them in making their cards and I don't know what they are. HELP!
Thanks for enlightening me!
Diane
Warning! Spellbinders Nestabilities are addictive! LOL
They just simply make sense! And there are lots of cards you can make with them, using them in different ways, not only stamping on them!
The best part is the price, when you do a side by side comparison with punches versus Spellbinders Nestabilities you'll be amazed!
There are lots of bloggers here that have samples! And lots of great tutorials on sites too!
My downline (cmustopa) came up with these sandwiches which I find work MUCH better than the other ones posted AND you can see the image you're cutting out.
CUTTING (from the bottom up):
A Plate
B Cutting Plate
Paper/Cardstock (stamped) face UP
Cutting Die, face DOWN
C Plate
The advantages of this are that a) you can see exactly where you are cutting around your image, and b) the C plate is sturdier than the B plate and can withstand more direct pressure from the Cuttlebug as it goes through. I have also found less embedding of the die in the plate this way, even though the conventional instructions for die cutting with the Cuttlebug say to do it face up.
EMBOSSING (from the bottom up):
A Plate
B Plate (can be the same one you cut with)
Die with cut piece still inside (flipped over so you can�t see the image)
Tan rubber mat
2 layers of HEAVY cardstock (I use a folded A-2 card made with 130# cover stock)
B Plate
Other instructions tell you to put the cardstock shim directly on top of the die, and then the rubber mat. I find I get a better impression this way. You may want to experiment with the cardstock shim layers, using 3 layers of 90# cardstock if you don�t have 130#. However, I have not cracked one B plate since I started doing it this way.
Another advantage of doing it this way is that when you�re switching back and forth between cutting and embossing, you only have to change the top plate.
Reporting back after having followed your instructions on how to stack the sandwich for nesties in the Bug....as a Nestie Virgin :lol: I was a little apprehensive to toss out all the other info I had printed and do it your way, but I took a leap of faith and followed your instructions to the letter. I am delighted to report that it worked BEAUTIFULLY!!! No flubs, no cracked plates, no guessing where the image was - perfect results everytime!
Thank you, thank you for sharing this valuable info! :mrgreen: It made my first Nestie experience a good one. I am now hooked and more Nesties are on order....:cool:
__________________ You can always tell a real friend; When you've made a fool of yourself, he doesn't think you've done a permanent job.
- Lawrence J. Peter http://community.webshots.com/user/neighbor_nancy
I must be thick...I don't get where the tape goes. You put the plates down...then the CS..then the die face down...so where does the tape go? Sorry, I feel so stupid..
I always cut first and then use my SAMJ to place the stsamp and it works great fo me...love this thread..g
It's really very easy. I take my image, lay it face up on my cutting mat (I use a Wizard), place the die over it with the cutting side down. Once I get the die centered over the image, I place tape on the edge of the die and the area of the image that will be cut away. I add the spacer plate and the second master mat and run it through. In essence, you are building the sandwich upside down. Sure you can flip the die with the image taped to it over, but this just saves time.
I also had a question about what you need tape for. I am a brand new Nestie user (and have a Cuttlebug). I haven't noticed a need for tape yet because the nestie has stayed right where I place it with out any shifting around (I've used the instructions Jamie posted above with great success. )
Perhaps if one is doing multiple Nestie cuts at one time you need tape? I'm puzzled about this too and would appreciate a more detailed explaination of when to use tape.
I want to send out a huge thank you to katestamp for sharing those instructions. I just got my rectangles in the mail today and am making cards for Provider Appreciation Day tomorrow. The instructions were so easy to follow and the results turned out awesome. Thank you, thank you, thank you!
which machine works best with nesties CB or big shot/kick?
I only have a cuttlebug so I can't compare them, but I LOVE my bug!!!!! Works like a dream with nesties!:mrgreen:
And for Boss, I have used the tape to hold the nestie in place when I have stamped first then am cutting (just to make sure nothing slips!). I haven't tried the sandwich stack listed above, but that would eliminate the need to do that I suppose... I also used it last night to do multi nestie cuts (I used 2 at the same time to make a "frame"...
Diane
I'm another one who has flipped the order of the sandwiches with my Bug. I have been doing it for months and never had a problem. I like to stamp first and cut second. I never gave it much thought when I put the B plate, then the paper (image up), die (cutting side down) and finally the C plate. I figure it is the thickness more than the order that counts. I like to see what I am cutting. And I also put the embossing mat right on the die and then the 3 paper shim. I think it gives a better impression. I think because the embossing mat has more "give" without the paper in between the mat and die.
__________________ Martha
"When you recover or discover something that nourishes your soul and brings joy, care enough about yourself to make room for it in your life." Jean Shinoda Bolen
I only have a cuttlebug so I can't compare them, but I LOVE my bug!!!!! Works like a dream with nesties!:mrgreen:
And for Boss, I have used the tape to hold the nestie in place when I have stamped first then am cutting (just to make sure nothing slips!). I haven't tried the sandwich stack listed above, but that would eliminate the need to do that I suppose... I also used it last night to do multi nestie cuts (I used 2 at the same time to make a "frame"...
Diane
Thanks for explaining how you use the tape. You are right in your guess that with the new stack recipe by Katestamps you don't need the tape, at least I haven't - no slippage when I cut or emboss doing it her way. :cool:
I can see where tape might be necessary to create the frame you did. I never thought of making just a frame, I'll have to give that a try!