Registered: January 26, 2005 Location: I'm seeing spots!!! Posts: 15188
Wed, Mar 23, 2005 @ 4:55 AM
I don't really have a template, I only made two (and probably won't make another ). Basically, I measured a piece of cs from the center out, so I had a 5 1/2 x 4 1/4 center, then scored around it. Then I scored again 1/4 inch around that, so the depth of the box is 1/4 inch. I left a flap on one side long enough to be the back, and left 1/2 inch on the top, bottom & remaining side to tuck under, and cut away everything else. I used a craft knife to cut open the doors, and to cut the louvres. Before I assembled it I wheeled the "wallpaper" background. I hope that makes sense. If you want more info, email me and I'll sketch a template & email it to you. Thanks! Beth
------------------------------ �.��* .��*��)) -:�:- ((��.��*~Beth.��*��)) -:�:- �� ((��.��* .��*((��.�.�� *-:�:- ... I'm always up to Something...
Registered: January 26, 2005 Location: I'm seeing spots!!! Posts: 15188
Fri, Mar 25, 2005 @ 5:07 AM
I posted the template during the upgrades, so it took a while to get posted (my fault, I didn't read the post about not uploading until AFTER I did it). Anyroad, the template is in my gallery, and here is the link: Gallery at Splitcoaststampers
------------------------------ �.��* .��*��)) -:�:- ((��.��*~Beth.��*��)) -:�:- �� ((��.��* .��*((��.�.�� *-:�:- ... I'm always up to Something...