Need help with my bew ATG 700

[ninajeanette2]

sorry, its ment to say NEW atg 700



I v finally managed to load it( i think,lol ) after i hold in the button and use the glue, then i take my fingers away from tht hold inn button, the glue wont cut off if that makes any sense, i had to use a scissor to cut the glue"line"

so what am i doing wrong?
i used a you tube video to load it;)

[RiverIsis]

Release the trigger button and lift/pull away and it should snap apart rather than cut.

[lovemyhorses]

The same thing happened to me until I realized that the tape wasn't snapped down onto its spool all the way. Because it wasn't snapped down, it allowed the tape to still feed, even though the trigger wasn't engaged. Someone on here posted a really great link to YouTube on how to load your ATG gun, and that really helped me. Try pushing the roll of tape all the way down on the spool, to make sure it's locked in place and see if that helps.

[ninajeanette2]

Quote:

Originally Posted by RiverIsis

Release the trigger button and lift/pull away and it should snap apart rather than cut.

I do but it wont snap apart the glue imean, its so stuck it keeps rolling,lol

can it be anything with the glue roll?
i bought everything from the same ebay seller:???:

[BillieDee]

Releasing the trigger should cause the wheels to freeze. Then pulling back will break the gooey glue strip. I once loaded it backwards (wheels turned the wrong way). Could this be what you've done?

[ninajeanette2]

Quote:

Originally Posted by BillieDee

Releasing the trigger should cause the wheels to freeze. Then pulling back will break the gooey glue strip. I once loaded it backwards (wheels turned the wrong way). Could this be what you've done?

i dont know,lol
which way is it suposed to be sticky?