Spinner Card Help
 

Hi,
I made my first spinner card over the weekend but I think I messed up somehow. :lol:

When I originally cut my slot, the pennies didn't move so I cut the slot a little wider & now the pennies don't spin...they just slide all the way to the end of the card.

I'm wondering if maybe I am using the wrong size of dimensions. I have the larger size & the mini ones. Which ones should I be putting on my pennies?

TIA!

SU's dimensionals work the best for this card. I had no success with other dimensionals. SO first of all, make sure you use SUs. Then, what I do makes it simple.

I use the half inch circle punch and punch that at both ends of where I want my spinner groove. Then I line up my Fiskars cutter so that it will slice from the outside edge of one circle to the outside edge of the other and I cut. Then I do the same thing on the other edge and cut.

I have a perfect sized groove without having to use an Exacto knife and it has neat ends and it is the right size! So those are the two things I saw that you might be doing wrong for a perfect spinner every time! Hope this helps you!

Thanks for the great directions Laurel!

Anytime!

Thanks so much.
I am not using the SU dimensions so I guess that will have to go on my next order from the Spring Mini. :)

I had the same problem with my first spinner card and assumed it was the dimensional. However, I think it was because my spinning object was completely round i.e. symmetrical. It needs to be asymmetrical to spin - otherwise just slides. I also found I needed to make the slot 3/8 inch - the 1/4 inch on Beate's directions was just too tight.

I'm working on spinner cards, myself, and I think my spinning element is simply too small. I think it doesn't have enough "heft" (if that's the right term) to spin. But there's also a chance that I didn't cut the slot in the card stock correctly.

These are the things we learn with practice, right?

would anyone have the template for this card? (Spinner)

please let me know!

Thanks
Emily

Here's the web site for the instructions from here on SCS. HTH

https://www.splitcoaststampers.com/r...es/spinner.php

Wanda

The first one I made, the slot was too big, so I put quarters in it. It worked! (And it was for DH so it was very much worth the extra 48 cents...LOL!) My second one was just a hair to big, so I put a nickel on the back and a penny on the front. That seemed to work also. HTH!