Stamp-a-ma-jig...is it worth having?
 

Hi! I'm a new demo (just got my starter kit today!), and I'm wondering if buying the Stamp-a-ma-jig would be a worthwhile tool to have? I'd appreciate any thoughts you would like to share on this...thanks in advance! :)

Yes, it's a great tool. It took some getting used to, but now I don't think I could do without it. It's especially useful for two-step stamping; it lines things up perfectly.

congradulations on becomeing a demo!

I'm fairly new too and wondered about the stamp ma a jig.....since I have a set of two step stamps I may have to add this to my list of must haves!

Linda

Aloha, Hawaiistamper!
Yes, Yes, Yes - the stamp-a-ma-jig is worth getting!!! I have several stamp positioners, but this is the only one that works as advertised. It is super easy to use - the feature I really like is that it does not slip out of place when I get ready to stamp, and you can position it on practially any artwork (I even use it to perfectly center stamps on metal rimmed tags). I have discovered that it is usually better to use the positioner in a vertical position -- it allows better visibility of the project and the wood on the stamp seems to slide down the side more easily than when the tool is horizontal. This jig is the only way to insure that you won't flub up the inside of a completed card with a saying that is off kilter, which is reason enough to get it.
Just returned from Maui last month and am still missing the sand and snorkeling...seeing your "handle" made me smile!
Susy

Stamp-a-ma-jig
 

Oooooooo....Stamp-a-ma-jig is a 'must have'! It allows perfect alignment of verse stamps (even word-by-word), and your 2-step stampin' will be beautifully placed. It is a favorite necessity and is money well-spent. Enjoy!

TexasGrammy

Re: stamp-a-majig
 

I have this and have not used it yet....I'm sure this is probably an easy question to answer but when and HOw do you use it. I'm sure it is simple but any advice so I don't have to read the instructions would be greatly appreciated.

You first place the plastic sheet smooth side up on an even surface and line the tool up with one corner of it. Then stamp your image in dark ink on the plastic using the interior corner of the tool as a guide. Place the sheet on your card with the image where you want it. Again line up the tool with the corner of the sheet, remove the sheet and stamp your image in your chosen color. It sounds complicated, but you'll soon get the hang of it with a little practice. It becomes second nature in a very short time, and the results are worth the effort. Let me know how you do with it.

I have the stamp-a-ma-jig as well and thought it was worth the money. However, I recently misplaced the plastic sheet! :oops: I don't really wish to purchase another just to have the sheet. I tried using a transparancy sheet but found it not to be sturdy enough for me. I would appreciate any suggestions!

Thanks!

Susan :D

YES....I agree ....it's a must have. At Walmart in the quilting supplies I buy "Extra Thick Template Plastic" (six sheets, 8 1/2 x 11). Very inexpensive and I make up templets for the stamp set I use with Stazon then store them right in the stamp set container...works great for me. Just use my paper cutter to cut into the right size. Really works great with the alpabet sets too. Takes a little time but well worth it! Happy stamping....Rebecca Goeres, Elma, Washington :lol:

Stamp-a-ma-jig imaging sheet refills
 

I could not stamp without this tool! I have become ridiculous w/this tool though; perfectionist w/every single stamp! I have bought stamp-a-ma-jig imaging sheets in packs of 3 for .99. Am I allowed to mention the store I got them at? I'm a newbie to this website.

I don't know if you can post the name of the store or not. If so, I would really like to know where you can get the plastic sheets as I've looked all over my house for my original and can't locate it anywhere. :cry: I'm thinking I might have thrown it away on accident with some other scrap paper.

Susan

I, too, would love to know where to get more imaging sheets...often times I have more than 4 images that I want to be perfectly aligned and I have to wipe off and start again before I'm finished with the project.
I noticed that someone said you should stamp on the smooth side of the imaging sheet. I have always stamped on the textured side rather than the smooth side because the images don't "scoot" (wet ink is naturally slick and when applied to the smooth surface, that tendancy is amplified.) After checking the instructions on the packaging, they also recommend using the textured side with dye based inks. Perhaps permanent images done with Staz-on are better applied to the smooth side, but since I have only one sheet, I don't think I'll try it! :wink:

Stamp-a-ma-jig
 

Best $$ you'll ever spend! I cannot believe I stamped for years without it! It is always out on my table! LOVE my Stamp-a-ma-jig!!!

Get one! You won't regret it! And, I guarantee, every time you demo with it, you will sell them! I think every single one of my customers have one. lol :P
~C

Another hint, when using smaller pieces of paper, for the little layers, I use removeable double stick tape to hold the paper in place. No movement of the paper when taking away the clear sheet.

Pam

Thank you all so much for your input! You've talked me into it...I'm putting one on my next order! :D
Happy Easter, Everyone!

I've never had a problem with the stamp"scooting" when I stamp on the smooth side. It is also easier to clean ink off the smooth side as opposed to the rough side. I also find that the plastic doesn't move around as much when it's used rough side down on smooth or glossy cardstock, so you can place your image exactly where you want it.

:D Yes, yes, yes. Did I say yes? I love it and use it too frequently! It took me a while to warm up to it, but it is so simple to use. It can even be used if you "flub" when stamping and the stamp is missing a part. Because you get exact placement, you can just stamp right back over it.

I have a different brand of stamp aligner that I just LOVE and it only cost $6.95. (It saved me $5 that I can spend on other stamping stuff!!) The only difference between it and the Stamp-a-ma-jig from SU is that it has a hard acrylic plate to stamp on instead of the soft, flexible sheet. I have never had problems with the plate slipping. I think a stamp aligner is a great tool, but I hate the fact that everything has to be so perfect now. Gone are the days when I could say "Oh well, it's a handmade card." :wink: