EZ Mount Static Cling
I might get a Misti Stamp Positioner. What size EZ Mount Static Cling should I buy to mount my red rubber to use in the positioner? I see it come in 1/16 or 1/8. Thanks!
|
I buy the 1/8" its a little thicker.
you just take the foam pad out of the Misti that is in there for the clear stamps and the 1/8" fits perfect. I am half way thinking if you did do the 1/16" on the top of old foam from when it was on a wood block, that it may be too thick?(that is what I think the skinny foam is intended for?) |
I ended up removing all the 1/16" stuff thar I had used. It seemed to get hard and lost all its stick. And even before that happened, I just did not like it as well as the 1/8".
|
Also depends on the red rubber. Some is markedly thicker than others. I like 1/8 myself but will use 1/16 if I am adding to existing foam. Just FYI...I dont know how much you will want to get but in bulk you save...this is a choice. Usually the grey is the 1/8 but in bulk I would ask to make sure. This one would be 3.84/sheet. Some places go over 5 dollars a sheet. You may also find a small pack option like 3 or 5 sheets. Tons of places are selling it now...even Office Supply (which has a lot of stamping stuff btw). |
All times are GMT -8. The time now is 10:03 PM. |