Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
Does anyone know if they work? I wanted to get one of the Sizzix Bigz Monograms. I have the original Sizzix diecutter and Cuttlebug. Wondering if it will work. TFS.
Go to the "Sticky" thread about Cuttlebug. It's near the top of the Tool & Product list. Someone made a list of all the dies and folders that work well and just how to "sandwich" them in the machine.
I have use the big sizzix in my cuttle bug. For me I put the
Plate A
2 pieces of chipboard cut larger then the die.
1 piece of chipboard cut to fit just inside the bottom of the die.
The Die
Plate B on top.
I use lots of sizzix dies with my cuttlebug. I have so much fun!!!
I just use 2 b plates with my dies. (These are the red ones).
The first set of b plates that came with my cuttlebug cracked and finally broke when I first used them with the dies, but I bought another set of plates and these are doing just fine - even cutting chipboard with the sizzix dies.
Yes the Bigz dies will work on the Cuttlebug. Use them between two "B" plates. I purchased several when Sizzix had that 70% off sale. However, the cutting plates will not go thru the Cuttlebug. You will have to cut off about a 1/4" of the cutting plates in order to use them on the Cuttlebug. The Ellison/Sizzix embossing mat is also about a 1/4" too wide.
I also use the Big Z in the Cuttlebug. as long as it is less than 5 inches wide. You may not need both plates, depending on what you are cutting. Good Luck!
I have a customer who wants to use the BigzL Perfect Pennants in her cuttlebug. I don't have one, so I'm not sure what to tell her.
Also, if it will fit, how does she sandwich it?
Thanks!
Sandwich for Cuttlebug and BigzL: B Plate, die, cardstock face down on die, B Plate.
You may have to hold the front part of the sandwich and "scrunch" it a little bit until it goes between the rollers and begins to go through. Mine seems like a tight fit, but does fine with this sandwich.
__________________ Bugga in OK
"Be kind whenever possible. It is always possible." Dalai Lama
I also use the Big Z in the Cuttlebug. as long as it is less than 5 inches wide. You may not need both plates, depending on what you are cutting. Good Luck!
If you don't need both plates for some reason, be sure to have the B Plate on top of the die and cardstock, not beneath. You don't want the die cutting into the Cuttlebug rollers.:shock:
__________________ Bugga in OK
"Be kind whenever possible. It is always possible." Dalai Lama