|
| |
|
Splitcoaststampers.com - the world's #1 papercrafting community |
|
|
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
Join the party at Splitcoaststampers today! |
|
12-08-2016, 05:31 PM
|
#1
|
Matboard Maniac
|
Clear stamp stuck to packaging
I recently ordered a clear stamp made by Prima Marketing. As usual, it came sandwiched between two pieces of plastic, one with the image showing. I got the plain piece of plastic off, but try as I might, I cannot get the stamp off the printed plastic. I have tugged as much as I dare, but I'm afraid of tearing the stamp if I put more muscle into it. I finally had to tape it to the Misti to use it.
This is a brand new stamp. I've never had a stamp do this, and I've emailed the company to get their advice, but in the meantime, I wonder if any of you has had this problem and how you solved it.
Thanks!
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
12-08-2016, 05:36 PM
|
#2
|
Swapper of the Month - January 2014
Join Date: Jul 2007
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
|
Here's an SCS thread with some suggestions: stamps stuck to acrylic backing they came on by kayceebee at Splitcoaststampers
Most suggestions are for ez mounted stamps, but at least one is for clear.
HTH a little! I've never had this dilemna........yikes!
__________________ "May your mind whirl joyful cartwheels of creativity." - Jonathan Lockwood Huie.
|
|
|
12-08-2016, 05:45 PM
|
#3
|
Swapper of the Month - January 2014
Join Date: Jul 2007
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
|
And a post from Poppydarling on another SCS thread: "After reading another helpful thread here, I put all of my clear stamp sets that were fused to the clear index backing sheets into the freezer and they finally could be pulled off! "
__________________ "May your mind whirl joyful cartwheels of creativity." - Jonathan Lockwood Huie.
|
|
|
12-08-2016, 06:23 PM
|
#4
|
Matboard Maniac
|
15 minutes in the freezer didn't help, so I put left it in for another 15; it still will not release. I think I'll just leave it there for a good while - it can't hurt! Thanks to to two of you. If anybody else has another suggestion, please feel free to post it here.
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
12-09-2016, 05:25 AM
|
#5
|
Stazon Splitcoast
Join Date: Apr 2006
Location: Las Vegas, baby!
|
I had an alphabet set that refused to let go of the packaging, so I just trimmed around each letter as if it was on cling foam and used them that way. I don't have them any more, but it worked for me at the time...
__________________ ~ Sue
Happy for no reason...
|
|
|
12-09-2016, 09:55 AM
|
#6
|
Matboard Maniac
|
Thanks, Sue. This is one solid stamp, and although I can tape it to the Misti or a block, I'd rather not. I'll tell you this for free, though: I'll never buy another Prima stamp again!
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
12-09-2016, 10:21 AM
|
#7
|
Gallery Gazer
|
Quote: Originally Posted by LemurLoverThanks, Sue. This is one solid stamp, and although I can tape it to the Misti or a block, I'd rather not. I'll tell you this for free, though: I'll never buy another Prima stamp again! |
If you still have the packaging, I'd be curious where it's made. And is the company Prima Marketing? Sorry you have to go through this.
|
|
|
12-09-2016, 11:40 AM
|
#8
|
Matboard Maniac
|
bjeans, it's Prima Marketing Company and the stamp was made in Taiwan. Based on information in the post from QueenOfInkland above, I wonder if the index sheet (which is what's stuck) is acetate, apparently a real no-no where clear stamps are concerned.
I did get hold of someone at Prima Marketing this morning - she suggested soaking it in soapy water, although I can't imagine why that would work. I'll try it, but I'm inclined to try to release it with GooGone, swabbing on a little at a time, then pulling, swabbing some more, etc.
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
12-09-2016, 11:47 AM
|
#9
|
Stazon Splitcoast
Join Date: Jun 2007
Location: Hilo, Hawaii
|
I'm very surprised the lady at Prima Marketing didn't say, "We're so sorry. We'll send you out a replacement right away." That's what I'd expect if I received a defective item from a company.
I've had this happen to me with a set I received as a gift. I just did what Sue did, and cut around the images. Then stuck a piece of double sided tape on them so they'd stick to my MISTI.
__________________ Pam
|
|
|
12-09-2016, 11:55 AM
|
#10
|
Swapper of the Month - January 2014
Join Date: Jul 2007
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
|
Ok....a few suggestions that I found at the bottom of this scrapbook.com thread: https://www.scrapbook.com/forums/sho...p?tid/1581901/
" yup like Becky said, try washing them. I had a couple of sets that were like this and I just ran them under some warm water and they came off just fine. "
"Use your blow dryer not your embossing tool it gets to hot and blow on the back of the plastic sheet. Warm them up slightly and they should come free."
__________________ "May your mind whirl joyful cartwheels of creativity." - Jonathan Lockwood Huie.
|
|
|
12-09-2016, 12:19 PM
|
#11
|
Gallery Gazer
|
Quote: Originally Posted by LemurLoverbjeans, it's Prima Marketing Company and the stamp was made in Taiwan. Based on information in the post from QueenOfInkland above, I wonder if the index sheet (which is what's stuck) is acetate, apparently a real no-no where clear stamps are concerned.
I did get hold of someone at Prima Marketing this morning - she suggested soaking it in soapy water, although I can't imagine why that would work. I'll try it, but I'm inclined to try to release it with GooGone, swabbing on a little at a time, then pulling, swabbing some more, etc. |
Let us know how it goes. I was thinking trying warmth instead of coldth too.
As per their website, GooGone shouldn't be used on rubber, but it doesn't say anything about photopolymer or acetate. In on-line comments back in 2012 or 2013 someone said Prima's clear stamps weren't photopolymer, but that was a long time ago, and believe it or not, you can't believe everything you read on the Internet. (Can you imagine?!)
Fingers crossed.
|
|
|
12-09-2016, 05:34 PM
|
#12
|
Proud Fan Club Member
Join Date: Dec 2009
Location: Central PA
|
My thought too was soaking in warm water a while.
|
|
|
12-09-2016, 06:17 PM
|
#13
|
Matboard Maniac
|
Soaking it in really hot water didn't budge it much, but in the end, it was the hair dryer on the hottest setting that did the trick. I'd hate to have to iron out the curl in the index sheet, but this stamp will never make contact with that again, believe me! Thanks to all of you for the ideas and the references to other threads by prior sufferers for pointing me in the right direction, and sympathizing, too.
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
12-10-2016, 07:33 PM
|
#14
|
Swapper of the Month - January 2014
Join Date: Jul 2007
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
|
Diana, so happy to hear you found a working solution.
__________________ "May your mind whirl joyful cartwheels of creativity." - Jonathan Lockwood Huie.
|
|
|
12-17-2016, 12:19 PM
|
#17
|
Kookie Creator
Join Date: May 2008
Location: Swindon, Wiltshire, UK
|
I was told to put the stamp in a bowl of warm water to help release it.
|
|
|
12-17-2016, 12:46 PM
|
#18
|
Gallery Gazer
|
You can't always find out, but I try to stay away from acrylic clear stamps, and stick with photopolymer, no pun intended. Really! I also try to find out if the backing sheet is acetate or polyester like Duralar. If it's acetate, I adhere it to a piece of Grafix Duralar, so the stamp doesn't touch it. Probably overkill, but simple and inexpensive, so I figure why not.
I assume other companies sell "safe" sheets too; Duralar is just readily available, including through Amazon, and their customer service is really good too, if you have questions.
|
|
|
12-31-2016, 09:42 PM
|
#19
|
Splitcoast Dirty Dozen
Join Date: Jul 2005
Location: Mount Albert, near Toronto, Ontario Canada
|
The Prima stamps I have actually have a very thin sheet of adhesive, thinner than cling plastic (kitchen) but looks similar, then a hard-backed ez mount style foam (kind of like SU! stamps have) with the image printed on it the the rubber (mint-colored) adhered to that. I found my stamps left the thin adhesive behind when I removed them from the acetate. when I showed Prima a photo they happily sent me a new stamp.
|
|
|
12-31-2016, 11:31 PM
|
#20
|
Matboard Maniac
|
Quote: Originally Posted by Rebecca EdnieThe Prima stamps I have actually have a very thin sheet of adhesive, thinner than cling plastic (kitchen) but looks similar, then a hard-backed ez mount style foam (kind of like SU! stamps have) with the image printed on it the the rubber (mint-colored) adhered to that. I found my stamps left the thin adhesive behind when I removed them from the acetate. when I showed Prima a photo they happily sent me a new stamp. |
Nice to know they stand behind their products! What I had was a clear stamp which I bought cheap on clearance, so not quite the same situation. In any case, I got the thing off the plastic and it will never come into contact with that stuff again!
__________________ Diana B
-We're all pretty bizarre. Some of us are just better at hiding it, that's all. ~John Hughes
|
|
|
07-15-2019, 06:42 AM
|
#21
|
Cardstock Collector
Join Date: Sep 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
|
Finally removed!
I had not used these clear stamps for years and they were welded to the acrylic. Prying did nothing. I tried very warm/hot water and a little soap. 3 came right off. The other 2 I chiseled off. I put the stamp on the lid of my MISTI and then, with the paper secured by magnets, closed the back to the stamp. It worked! I really like the stamps and did not want to lose them out of my stash.
|
|
|
07-16-2019, 05:06 AM
|
#22
|
Splitcoast Artist in Residence Splitcoast Dirty Dozen Alumni Mix-Ability Challenge Hostess
Join Date: Oct 2004
Location: Warsaw, MO
|
Quote: Originally Posted by Rebecca EdnieThe Prima stamps I have actually have a very thin sheet of adhesive, thinner than cling plastic (kitchen) but looks similar, then a hard-backed ez mount style foam (kind of like SU! stamps have) with the image printed on it the the rubber (mint-colored) adhered to that. I found my stamps left the thin adhesive behind when I removed them from the acetate. when I showed Prima a photo they happily sent me a new stamp. |
I have some of these too that I haven't used for a while, and I noticed the other day that the backing is separating from the foam.
|
|
|
07-16-2019, 07:48 AM
|
#24
|
Insane Embellisher
Join Date: Aug 2005
Location: Western PA
|
I too noticed a lot of stamps are giving me a harder time being removed from the sheets. I struggle with dies too - wish I knew what double sided tape those companies use... it's like CEMENT. LOL.
Thanks for this thread... At least I know it isn't just me and my age creeping up on me..
Last edited by mac4551; 07-16-2019 at 07:48 AM..
Reason: spelling
|
|
|
07-17-2019, 06:08 AM
|
#27
|
Mad Swapper
Join Date: Feb 2011
Location: North Texas
|
Be sure you make a copy of your index sheet before using a hair dryer to get your stamp(s) loose. Otherwise you will likely be having to diy a new one as it can warp or melt the acetate/plastic.
|
|
|
07-17-2019, 07:14 PM
|
#28
|
Glitter Guru
|
I was fortunate. It did not take too long to heat them and get them to remove from the sheet. I was very careful, pulled a small section at a time and didnt hold it in the same spot too long.
Quote: Originally Posted by stampin stacyBe sure you make a copy of your index sheet before using a hair dryer to get your stamp(s) loose. Otherwise you will likely be having to diy a new one as it can warp or melt the acetate/plastic. |
|
|
|
07-18-2019, 05:30 AM
|
#29
|
Mad Swapper
Join Date: Feb 2011
Location: North Texas
|
Oh good, I hope others do as you described too.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Posting Rules
|
You may post new threads
You may post replies
You may post attachments
You may edit your posts
HTML code is On
|
|
|
|