Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
I have Perfect Layers tools, but find that after one layer it starts getting tricky adding more and staying accurate. I went searching for a solution and found one that I was able to make with stuff I had on hand - so it cost me nothing! You can see my homemade jig here: DIY Jig
__________________ Linda E
Caution: You are entering an artistic zone. This is not clutter - this is creating. These are not pajamas - it's my work uniform.
I have a question - how do you use your layering tool on the middle sections of your tri-shutter card shown on your blog post? Your card is gorgeous!
Edited - the tri-shutter card is actually in your blog header.
Thank you. I did not have this layer positioning tool back then when I made that card. Maybe I can try making another one with this tool and see if it is possible to use on such a card. Wouldn't that be helpful with all those sections?
I have Perfect Layers tools, but find that after one layer it starts getting tricky adding more and staying accurate. I went searching for a solution and found one that I was able to make with stuff I had on hand - so it cost me nothing! You can see my homemade jig here: DIY Jig
If anyone who has the time or inclination, it would be awesome to have a video tutorial. My brain must be asleep this morning and I'm not quite getting the whole concept. Looks awesome though.
If anyone who has the time or inclination, it would be awesome to have a video tutorial. My brain must be asleep this morning and I'm not quite getting the whole concept. Looks awesome though.
What a genius idea! I make lots of multiple cards for holidays, and this would help so much. I'm pretty good at eyeballing to get the layers even, but this would save me so much anxiety about getting them just right!
__________________ Bugga in OK
"Be kind whenever possible. It is always possible." Dalai Lama
Thank you so much for sharing this. And I did look at this new tool, cause I am prone to shopping. The Marsupial tool is selling for $45.00 so I will be using picture matting I can buy at Walmart to create my own tool. Thank you for the picture of your jig.
I used a piece of plexiglas only because I have a bunch given to me, but I think masonite would work really well, too. Foam core probably would work fine, too, but the way I toss things about when in a crafting frenzy, I wanted something sturdier.
This is brilliant! Thank you so much for sharing, Charmaine. Can't wait to make myself some of these.
__________________
Our birth is but a sleep and a forgetting: The Soul that rises with us, our life's Star, Hath had elsewhere its setting, And cometh from afar... (-Wordsworth)
I'm just wondering how it works if the jig thing is thicker than the card you are using, does it sit flat? Not quite picturing it.
It works. You have your adhesive facing up. The top piece might be above that, but not by much, and a light press in centre attaches the layers. I use double sided tape that grabs quick.
I'm just wondering how it works if the jig thing is thicker than the card you are using, does it sit flat? Not quite picturing it.
This would be a time that you want to put an big X on the back of the card panels, not just tape along the edges.
Then you put slight pressure in the center of the cards and it attaches to the one underneath. Even if you use really thin paper, it will attach if you have tape in the center of the panel.
While looking at something else I came across the Marsupial layering tool and didn't recognize it...and hey, a tool that will let me place my layers straight-well! I have to run home and check with the gang about this!
And sure enough...it was here-the "cadillac" version of the jig idea. I had missed the back end of this thread and had not seen it or the cut down a picture mat idea.
It's on my list now-get mats! And I may be by a Michaels today too! Whoot!
I came across references to the Spellbinders Layer Creator, but it doesn't seem to be on sale any more. A shame, because it looked to be a more convenient size than the Marsupial tool. Hopefully someone will sell the Marsupial tool in Australia soon.
So thank you, I will try the photo mat idea, I think it is better than using rulers and repositionable adhesive, like I have been doing.
I*think* we are talking about two different things.
People have problems cutting straight layers, so some of us use the Spellbinders Basic matting layers-they come in 2 sizes (A and B) for 3 cards-A2, A7 and 6 inch squares. If you get both and mix them, you can cut within 1/8 inch. Then there are special ones like rounded corners, etc.
I was talking about this: SPELLBINDERS LAYER CREATOR BASIC which seems to have been an L-shaped plastic ruler with indentations which worked like the thing made from photo mats. Perhaps there were patent issues with it, because it doesn't seem to be around any more.
Thanks for the link for the Marsupial.
I was talking about this: SPELLBINDERS LAYER CREATOR BASIC which seems to have been an L-shaped plastic ruler with indentations which worked like the thing made from photo mats. Perhaps there were patent issues with it, because it doesn't seem to be around any more.
Thanks for the link for the Marsupial.
I clicked on your link, and it looks like you can still order this tool. They say they have 121 in stock.
__________________ Bugga in OK
"Be kind whenever possible. It is always possible." Dalai Lama
Note: The $10 off code for the Marsupial jig worked: LAYER10.
The owner sent me a link to a much longer youtube video by the same person Charmaine linked to (Michelle), very fun. She spends a good bit of time on how to figure out what size paper to cut for different width layers - IOW before being placed on the jig. While I understood that, it was still fun to watch, and could be useful for a bunch of people.
The layering widths for the jig are 1/8", 1/4", 3/8", 1/2" and 3/4". You can add more than one layer to a card and they can be different widths.
I ordered one. I have a bum knee that sometimes is okayish and sometimes gets mad at me when I sit-stand-sit. But I have to stand to eyeball and place layers. I wouldn't have to with this.
While considering whether to order the Layer Creator or the Marsupial, or wait until I can buy one of them here in Australia, I turned to my trusty Silhouette machine. I cut measured L shaped cardboard pieces, and tried using one as a layer guide butted up against the inside edge of the Misti. ( suggested in this thread ) It worked well enough. I made the L pieces just big enough for a 4x6" picture I wanted to mat. I am going to cut some more, this time making them the full size of the Misti interior, as then I can use the magnets to keep the L shaped piece still and flat.
I think anyone who has the rectangular Spellbinder matting dies could also make accurate L shaped pieces. They could also be made with a craft knife and ruler, but anyone that good with a craft knife and ruler would be able to use the Perfect Layers tools, I reckon.
It may be possible to do matted circles using the Misti magnetic base. I'm not sure what matted circles would be useful for, though.
I ordered the jig from Marsupial partly because all border widths are on one board. I don't have to set up or use multiple pieces to make a double or triple-matted card, even with varying border widths. Convenient, especially if wanting to whip through a bunch.
A cutting mat, Scor-Pal, and a couple other "boards" are on the floor in a gap between the front leg of a small table on my left and a small Alex unit, and another just beyond it. Just nice to grab and go.
I have a plastic border system made up of pieces, and I don't use it because I've already got pieces of everything everywhere. (Time to straighten up.)