Transparency cards

[buzsy]

How do you ladies attach cardstock to your transparency card? :confused: What would be the best way? I thought using brads would be a great way, but what about the inside of the transparency card? :rolleyes: Any suggestions would be appreciated.

[stampin' andrea]

I would love to know this too!

[Motherof6]

I just use regular mono. I cut the same shape to go on the inside/back cover (same design cut 4 times).

[stampin' andrea]

Quote:

Originally Posted by Motherof6

I just use regular mono. I cut the same shape to go on the inside/back cover (same design cut 4 times).

Thanks!

So is that the way it is always done (paper glued to each side of the transparency so the adhesive doesn't show)? For some reason I thought that the paper was only glued to the inside (or outside) and just showed through the transparency....

[newbie007]

I have seen the transparency folded like a book with the cardstock folded the same inside and tie togther with a ribbon on the fold.

[housefan]

I use glue dots and position them under a part of the inked design.

[stampmouse]

brads or vellum tape

[buzsy]

Thanks for the tips. I have to try to make one card very soon. I will let you all know how I did! :o) Happy Stampin'!

[stampinboilermaker]

I made a transparency card, and it was sooo easy! It folded just fine, and I punched 2 squares of cs and adhered the inside one first, then lined up the square on the front of the card. I used the Duck adhesive (in the red holder), and it was barely visible. I also stamped by 'handmade by..." on the back of the inside square so it could be read on the back of the card. The hardest thing with these is getting a good picture of it! (ps; don't try to scan it unless you want a picture of your scanner cover with a few floating images on it! ask me how I know;) )