Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
We got the real thing today but what I am looking for is what does everyone use for snow effect on cards etc.? I want some to go on the roof line of a winter type house. I tried the snow writer and it just didn't give the effect I wanted. Any suggestions would be appreciated.
I use white craft ink embossed with iridescent ice powder. Also, the crystal-y snow sold in jars at craft stores this time of year works great with a thin coat of white crafting glue. Use it just like glitter, only snowier. If it's not at the store with Christmas craft stuff, look in the aisles with Christmas Village displays, lots of village collectors use in their displays.
Mary Beth
If you want white snow: I use white embossing powder for small areas. For larger area's I've use either white acrylic paint or gel medium mixed with white pigment ink and then painted it on. Both are wet applications so you do have to be careful what paper and inks you use but they give a nice textural finish.
If you want a glitter instead of white look: I have used a tube of glitter glue that I got at Michael's several years ago. I found it in the christmas aisle and it is also by Deco Arts, it is called Glittering Snow Writer. It was pretty inexpensive and looks like it will last me forever. It has a fine tip for dimensional application or you can spread it out flat.
I had a similar question a while ago. I had a forest stamp and wanted to add snow to the ground and in the sky. My LSS suggested a product called shabby white embossing enamel by Stampendous. Sprinkle a bit on and heat from below ( to prevent it blowing off)It has various texture and a bit of glimmer and looks awesome. I was a bit unsure at first, but it looks great and all my friends went right out and got some too. I don't know if this is what you are looking for, but worth a try. Good luck.
Aleene's makes snow "paste" that comes in a jar with or without glitter. I use a toothpick to apply it. It also makes great frosting on cake and cupcake images.
I use DIMENSIONAL PAINT from the craft section at Walmart! There's just plain old white or white with glitter. I squeeze it out where I want it & then heat it & it puffs up like snow! Here's what to look for: TULIP-Dimensional Fabric Paint! I LOVE IT!!!!!!!
When all else fails or its late at night or the middle of a project that snow has to get done--get a Styrofoam cup or Styrofoam packing squares (from appliance boxes) and break it up into pieces...put it in your blender and set it on "blend"...it'll break it down to tiny lil' pieces--glue to project! Works perfect for "snow effect"...
Another source of snow....use white paper and empty your 3-hole punch--you get tiny lil' white circles--glue for snow effect to a project!
__________________ I love creating something...from nothing! Susanne
Flower soft can get a little expensive if you are doing a lot of 'snow' cards. Like Cat_woman says styrofoam balls make great snow for real cheap! I mostly use the snow from the hobby store that model train people use for their scenery. It comes in a big jar for about $5.oo Cdn. and looks really good.
I like glitter embossing powder or Martha Stewart white tinsel glitter. You can make your own glitter embossing powder with 1pt glitter to 2pt embossing powder. Just be very careful not to overheat it.
__________________ RebeccaEdnie Mixed Media Artist, Paper Crafter, Jewelry Designer SCSDirtyDozenAlumni Www.Boxofchocolatescrafts.Com YouNeverKnowWhatI’mGoingtoMake
Marvy Snow Marker!! I use the Marvy Snow Marker and it looks great. I have never had it yellow. I pulled out some Christmas cards that we made in our store from last year that had the marker on it and it still looks white. We sell a lot of them in the store I work in and have never had any complaints. hth
Tim holtz has a tutorial where he mixes up white and clear UTEE with glitter and glossy accents. Makes a chunky but hard drying snow that you can lump up to get lots of dimension with a palette knife. I've used it and it seems like it's not going to be wet enough but it is and it's great. Good for a 3-D look and for filling in cracks but you can also apply it lightly enough for a single layer card. Sorry but I don't have the link handy.
__________________ RebeccaEdnie Mixed Media Artist, Paper Crafter, Jewelry Designer SCSDirtyDozenAlumni Www.Boxofchocolatescrafts.Com YouNeverKnowWhatI’mGoingtoMake
I really like the Faux Snow by Art Institute. It's sparkly and a little chunky and when you use it - you'll get it everywhere. :-D I just used it tonight to add snow to a roof line.
I try to make a few Tim Holtz tags every year. I think I'll stamp some then make a batch of snow and add it to all of them at once. I didn't know that his snow was something I could make at home. TFS
Mary Beth
Oh my gosh, this is the perfect opportunity to tell you about a new (to me at least!) product I just received & did a couple of samples to see how it performed. The product is Hero Arts White Puff embossing powder.
What i discovered that unique about this product is that it allows you to stamp & heat emboss a detailed image, and still retain the detail at the same time that it creates a slightly raised, textured embossing. It keeps its pure white, snowy-look after heat embossing. Note here: I used PaperTreyInk Fresh Snow pigment ink as my carrier ink underneath the embossing powder.
The cool thing about this Hero Arts White Puff is that it creates a delicate, realistic looking snow. It doesn’t cover up or distort smaller images/die cuts like puff paint or flower soft, and it is not messy to use.
I don’t have any completed projects to show off yet, that being said, I did try two different techniques using this product and both turned out great.
In one sample I stamped a pine branch with lots of fine line needles, using PTI Fresh Snow ink and heat embossing the HA White Puff. The detail of the needles was still there after embossing, and they had a texture that was visible, but not overpowering.
The other technique I used was to smear a bit of PTI Fresh Snow ink on some die cut pine boughs, sprinkle with HA White Puff and heat emboss. It looked like real snow!!!! Again, it wasn’t overpowering, it just looked realistic. I did a side-by-side comparison of this HA piece with a diecut embossed with PTI detail white embossing powder, and the HA White Puff was noticeably more snow-like. When my hubby saw the two samples, he said the HA sampled looked like real snow, without prompting from me. It passed the Hubby Test, so it’s a winner in my book! :cool:
Good to hear this because I just ordered some of the White Puff embossing powder! Looking forward to tryin it!
Quote:
Originally Posted by Boss
Oh my gosh, this is the perfect opportunity to tell you about a new (to me at least!) product I just received & did a couple of samples to see how it performed. The product is Hero Arts White Puff embossing powder.
What i discovered that unique about this product is that it allows you to stamp & heat emboss a detailed image, and still retain the detail at the same time that it creates a slightly raised, textured embossing. It keeps its pure white, snowy-look after heat embossing. Note here: I used PaperTreyInk Fresh Snow pigment ink as my carrier ink underneath the embossing powder.
The cool thing about this Hero Arts White Puff is that it creates a delicate, realistic looking snow. It doesn’t cover up or distort smaller images/die cuts like puff paint or flower soft, and it is not messy to use.
I don’t have any completed projects to show off yet, that being said, I did try two different techniques using this product and both turned out great.
In one sample I stamped a pine branch with lots of fine line needles, using PTI Fresh Snow ink and heat embossing the HA White Puff. The detail of the needles was still there after embossing, and they had a texture that was visible, but not overpowering.
The other technique I used was to smear a bit of PTI Fresh Snow ink on some die cut pine boughs, sprinkle with HA White Puff and heat emboss. It looked like real snow!!!! Again, it wasn’t overpowering, it just looked realistic. I did a side-by-side comparison of this HA piece with a diecut embossed with PTI detail white embossing powder, and the HA White Puff was noticeably more snow-like. When my hubby saw the two samples, he said the HA sampled looked like real snow, without prompting from me. It passed the Hubby Test, so it’s a winner in my book! :cool:
I use Tulip Dimensional Fabric Paint for snow & heat it up. It puffs up nicely! It is easy to find at Walmart & comes in a bottle with a small tip for application. They have ALL COLORS & even some with glitter in them. It's cheap too! ;)
Wow, this looks like a fun technique! I had no idea when I ordered these products that they could be used together. Can’t believe I have both the HA White Puff Emboss powder and the HA Lacquer Pen that was used for this snow & froth look. Thank you for sharing this link!
By the way, i did use the Lacquer Pen and it worked well. It is in a skinny tube that is exactly like the tubes for Lawn Fawn Glue & Gina K Glue. The tip on tube dispenses the Lacquer in precise, easy to control dots or lines. The lacquer dries clear and keeps a nice dimension, and has a bit of shine.
I used this Lacquer Pen to make tiny noses on some kraft cs deer diecuts and let it dry overnight. The final result was so cool - the deer had shiny little noses that were same tone as the kraft cs they were made of, and the noses were nicely domed, like a half-pearl (except clear).
Reviving an old thread. Just opened a jar of Deco Art Snow-Tex. Do I need to put saran wrap over it before putting the lid back on, so that it won't dry out? Or does this product stay workable without doing that?
Reviving an old thread. Just opened a jar of Deco Art Snow-Tex. Do I need to put saran wrap over it before putting the lid back on, so that it won't dry out? Or does this product stay workable without doing that?
thanks
Shirl
Mine still has not dried out after at least three years, but it's definitely thicker than it was and harder to spread unless I thin it with distilled water. I'd play safe and use the wrap.