Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
This is probably a dumb ? but while I was mounting my Stampin UP wooden stamps, tonight was wondering: does everyone just throw the rubber stuff away (that comes around the stamp itself). I don't want to throw them away if someone has a use for them? The landfill will be loaded with all the stamps we all buy.
Thanks, I guess it wasn't a dumb question after all. I have thrown lots of these away but I am going to hang onto them now. Thanks for the link of the mosiac and your beautiful card.
It certainly wasn't a dumb question. :-) And you're welcome! The resource page suggests using black ink to fill in the "grout" lines. For my projects, I found that colour a little harsh. I think I used Crumb Cake on the card I attached. A lot depends on the look you want to achieve. Have fun with your rubber waste!!
You can also create "frame" stamps. If the void is a square and you have enough room to trim a square around it, you just made a frame stamp! Works with any shape you have enough room around the space where the stamp was.
You could make yourself a mosaic background stamp. SCS has a tutorial in their resource section: Stained Mosaic
I took an extra wood block and mounted my rubber pieces so I'd have a permanent stamp to use. Below is one of the cards I made with this technique.
Some of my stamping friends cut up the rubber waste to use as dimensionals/foam dots. Not sure if the adhesive is acid free, though.
If there are large enough expanses of left-over rubber, you could cut it with a die and use that shape as a new solid stamp.
this was suggested by my demo (at the time) several years ago. I made some cards doing that. It looked great at the time....but, they aren't acid free. So, it has since come through the card....and looks yucky!!! This card is probably about 6 years old now.
If the pieces between are big enough...save those. You can use the solid piece as a reverse stamp. Ink up you stamp...and then put it on that solid piece of rubber.....then use it like a regular stamp. It then puts your design in reverse. Pretty cool!
__________________ **~Suzy~** *Life is about using the whole box of crayons* ** A sleeping cat is a good excuse to not make the bed **
You could make yourself a mosaic background stamp. SCS has a tutorial in their resource section: Stained Mosaic
I took an extra wood block and mounted my rubber pieces so I'd have a permanent stamp to use. Below is one of the cards I made with this technique.
Some of my stamping friends cut up the rubber waste to use as dimensionals/foam dots. Not sure if the adhesive is acid free, though.
If there are large enough expanses of left-over rubber, you could cut it with a die and use that shape as a new solid stamp.
My sister and I did exactly that. Her hubby cut some wood blocks for us (around 4 1/2" x 5 3/4"), we cut up the rubber into smaller pieces and mounted them on the wooden blocks.
Suzy...thanks for confirming that the adhesive on the rubber waste is not acid free, unlike real dimensionals/pop dots. Fine to use if you don't care if your card lasts, but I know of some recipients of hand-made cards (myself included) who keep them forever. It would be awful to ruin the cards with the wrong adhesives.
Suzy...thanks for confirming that the adhesive on the rubber waste is not acid free, unlike real dimensionals/pop dots. Fine to use if you don't care if your card lasts, but I know of some recipients of hand-made cards (myself included) who keep them forever. It would be awful to ruin the cards with the wrong adhesives.
This is a great idea! TFS
__________________ Lindsey Please visit my little blog, or my gallery...
Suzy...thanks for confirming that the adhesive on the rubber waste is not acid free, unlike real dimensionals/pop dots. Fine to use if you don't care if your card lasts, but I know of some recipients of hand-made cards (myself included) who keep them forever. It would be awful to ruin the cards with the wrong adhesives.
Thanks for that link about using for masking. Now, I wish I had kept them all, but then I would need more storage room, lol, and I am having a hard enough time trying to figure out how to store all my stamps. I noticed you are in Canada. Me too although my "handle" doesn't say that. How do I rectify that, do you know?
Thanks for that link about using for masking. Now, I wish I had kept them all, but then I would need more storage room, lol, and I am having a hard enough time trying to figure out how to store all my stamps. I noticed you are in Canada. Me too although my "handle" doesn't say that. How do I rectify that, do you know?
Forgot to thank everyone for their replies. You are all so great!
Thanks for that link about using for masking. Now, I wish I had kept them all, but then I would need more storage room, lol, and I am having a hard enough time trying to figure out how to store all my stamps. I noticed you are in Canada. Me too although my "handle" doesn't say that. How do I rectify that, do you know?
If you do other crafts such as sewing or crochet, you can use your scrap rubber or cling foam as stuffing for baby or toddler toys. Babies love exploring different textures. Just make sure the lining is secure and the filling isn't going to get out. It's a good way to recycle the excess rubber from unmounted or clear stamps from other companies.
In addition to saving the rubber, the cling foam backing can be useful. It will stick to mirrors and to stainless steel. So for all the things with magnets that won't stick to your new fridge - put them up with foam backing.
You would of course need a full sized steel rule die not a low profile die to cut rubber. You can actually get foam meant to stamp with for use in dies even low profile ones. It is similar to fun foam but better quality and has temporary adhesive on it already. Quickutz makes it, or at least they used to. So any die you own can become a stamp. Doesn't use up rubber bits, bit of a side point!
__________________ RebeccaEdnie Mixed Media Artist, Paper Crafter, Jewelry Designer SCSDirtyDozenAlumni Www.Boxofchocolatescrafts.Com YouNeverKnowWhatI’mGoingtoMake
Another idea for the left over rubber is to use the punched out shapes or cut shapes to make a camouflage background stamp....much like the mosiac stamp.
I reuse mine! Of course they are too thin to carve, but I've made some nice abstract backgrounds with them. I've made stripes and little squares backgrounds! Plus, I also made the top of a cattail for the SU 'Inspired By Nature" set and custom shapes for the SU tag/label stamps. Oh! By the way don't throw away the pre-cut-out shapes either!!!! You can use those for even more precise stamped backgrounds for the stamp it wnet with. Take the SU 'Sew Suite' set: the button board had the extra rubber pre-cut from the middle. I used it to stamp the inside of the board for a multi color look! See pic.
they also work great to put on the corners of cupboard doors so they don't slam
__________________ Kyloe
The lesson from Charlie Brown: The people who make a difference in your life are not the ones with the most credentials, the most money, or the most awards. They are the ones that care.
I have made animal prints for backgrounds. Either put them on a spare block or on a wheel that has been unmounted from its stamp. Easy to make zebra/tiger and giraffe/leopard. They were so easy andI had so much rubber that I made tim as gifts for my stamping friends.